Stainless Steel Specialty Doors


 
Model
Click for Data Sheet
True Stile & Rail
Glass or Solid Panel
Endura Gamma Temperature Rise
Core Type Varies, Depending on Application Impact Resistant SS Stiffened / Lead Lined 250° or 450°
Core Density 2.0 pcf N/A 32 pcf
Compression Strength 28 psi N/A 100 psi
R-Factor 12.40 N/A 3.95
U-Value .08 N/A .25
Service Temp -100° to 250° (F) -20° to 150° (F) Fire Resistant
Min. STC STC 26 STC 23 STC 33
Fire Rating See Fire Rated
Bullet Resistant UL Levels 1-8 See Bullet Resistant


Construction
NAAMM / HMMA 866 (Stainless Steel Hollow Metal)
Door Thickness 1-3/4"
Face Skins 18, 16, 14, or 12 GA
Material Options 304 Stainless Steel (Exterior)
316 Stainless Steel (Exterior, Salt Air)
See Types of Stainless
Door Edges Beveled, 1/8" in 2"
Edge Construction Options See Vertical Door Edge Options
Top + Bottom Channels 16 GA Stainless Steel
See Door Top + Bottom Details
Hinge Reinforcements 7 GA Stainless Steel, 1-1/2" x 10"
Lock Reinforcements 11 GA Stainless or equal # threads
Closer Reinforcements 14 or 12 GA Stainless Steel
Finish Options See Stainless Steel Finish Options
Quick Ship See Quick Ship

NOTE: Above door data varies depending on specific design criteria




Environmental Data

As encapsulated door cores, there exist no health hazards or toxic gas emissions. During fire, few, if any, toxic gasses are produced and door cores are rated as Class I fire retardant materials.

All resins and bonding agents utilized in fabrication are low VOC / environmentally friendly. The long life cycle of the Stainless Steel doors makes them truly sustainable products. See LEED Information.



Helpful Information