Lab-Tek Steel Clean Room Doors

Lab-Tek Stainless Steel Clean Room Doors

Hermetically Sealed Construction

Bacteria Resistant and Vermin Proof

Download Lab-Tek data sheet (PDF)

Description Lab-Tek doors are built-to-order, suitable for both interior and exterior locations.
NAAMM / HMMA 802, 810, 850
Material 1. Cold Rolled Steel
2. A60 or G90 Galvanized
Faces 18, 16, 14 or 12 GA
Door Edges 1-3/4" thick, beveled, 1/8" in 2"
Vertical Edges Continuous Welded all 4 edges
Hermetically Sealed
See Vertical Door Edges
Top / Bottom 16 GA, Sealed all 4 edges
See Door Top + Bottom Details
Reinforcements Hinges: 7 GA, 1-1/2" X 10"
Locks: 11 GA or equal # threads
Closers: 14 or 12 GA
Service Temp -20° to 150° (F)
Core Varies, depending on application
STC Available (Contact factory)
Fire Rating See Fire Rated
Bullet Resistant See Bullet Resistant
Finishes Gray, EPA Approved, Alkyd, zinc compound primer, standard. Finish paint also available. See Finishes

NOTE: Above door data varies depending on specific design criteria