Steel Composite Doors


 
Core Type
Click for Data Sheet
Honeycomb Polyisocanurate Polystyrene
Core Density N/A 2.0 pcf 1.5 pcf
Compression Strength 45 psi 28 psi 35 psi
R-Factor 2.44 12.40 8.05
U-Value .40 .08 .12
Service Temp 32° to 90° (F) -100° to 250° (F) -50° to 130° (F)
Min. STC STC 32 STC 26 STC 23
Fire Rating See Fire Rated
Bullet Resistant UL Levels 1-8 See Bullet Resistant


Construction
NAAMM / HMMA / SDI See Individual Door Data Sheets (click core type above for PDF)
Door Thickness 1-3/4" (Special thicknesses available)
Face Skins 18, 16, 14, or 12 GA
Material Options 1. Cold Rolled Steel
2. A60 Galvanized Steel
3. G90 Galvanized Steel
Door Edges Beveled, 1/8" in 2"
Edge Construction Options 1. Welded 3" OC, Seamless
2. Continuous Welded, Seamless
3. Open Seam
See Vertical Door Edge Options
Top + Bottom Channels 16 GA
See Door Top + Bottom Details
Hinge Reinforcements 7 GA, 1-1/2" x 10"
Lock Reinforcements 11 GA or equal # threads
Closer Reinforcements 14 or 12 GA
Finish Options See Finish Options
Quick Ship 1, 3, 5 or 10-Day Options. See Quick Ship

NOTE: Above door data varies depending on specific design criteria




Environmental Data

As encapsulated door cores, there exist no health hazards or toxic gas emissions. During fire, few, if any, toxic gasses are produced and door cores are rated as Class I fire retardant materials.

All resins and bonding agents utilized in fabrication are low VOC / environmentally friendly. The long life cycle of the steel doors makes them truly sustainable products. See LEED Information.



Helpful Information